User`s guide

7 – Setting Up Connections
Configuring Fibre Channel Devices
FS0054601-00 E 7-13
Q
3. The confirm forced separation of device message displays. Do one of the
following:
❑ Click No to not separate the device.
❑ Click Yes to force device separation. The new configuration displays, as in
the example in figure 7-5; there are two listings for device node
name 34-34-34-34-34-34-34-34.
Figure 7-5. Force Separated Device Configuration
7.2.1.3.2
Combining Separated Devices
This feature is available only on Windows NT/2000 when failover is enabled.
Perform the following steps to combine two devices with the same device node
name that were separated based on their port name back into one device based
on the device node name:
1. From the Fibre Channel Port Configuration dialog box, click in the cell in the
Device Node Name column. For example, click device node name
34-34-34-34-34-34-34-34 in figure 7-5.
2. Do one of the following:
❑ From the Device menu, select Combine Separated Devices.
❑ Right-click and select Combine Separated Devices.