User`s guide

7 – Setting Up Connections

Configuring Fibre Channel Devices

FS0054601-00 E 7-9

In addition, the cell is color-coded as follows to represent path information:

❑ White with Open Eye icon. Path visible to the operating system

❑ Black with no icon. Path hidden from the operating system

❑ Gray with Stop icon. Unconfigured device

❑ White with no icon. No path

2. Select the following, as appropriate, from the Fibre Channel Port

Configuration dialog box:

❑ Configure device paths for this host (see section 7.2.1):

❑ Auto configuring all device paths (see section 7.2.1.1)

❑ Configuring individual device paths (see section 7.2.1.2)

❑ Forcing separation of device ports (see section 7.2.1.3)

❑ Configure LUN path failover and LUN masking for this host (see

section 7.2.2):

❑ Enable or disable failover configuration (see section 7.2.2.1)

❑ Load balancing all LUN paths (see section 7.2.2.2)

❑ Enabling and disabling all LUNs (see section 7.2.2.3)

❑ Configuring LUN path failover and LUN masking for a device (see

section 7.3)

❑ Configure LUN masking for this host (see section 7.2.2):

❑ Enabling and disabling all LUNs (see section 7.2.2)

❑ Configuring LUN masking for a device (see section 7.3)

❑ Bind target devices attached to the adapter (see section 7.6)

❑ Delete persistent configuration data for an adapter or device (see

section 7.7) (This option is not available on Solaris SPARC.)

❑ View information (see section 7.4):

❑ Adapter information (see section 7.4.1)

❑ Device information (see section 7.4.2)

❑ Get help. From the Help menu, click Browse Contents. The help text for

the Fibre Channel Port Configuration dialog box displays.