User`s guide

6 – Getting Started
Updating the HBA Tree
6-16 FS0054601-00 E
Q
❑ Enable the selected LUN and display a message if the LUN is already
enabled on another host(s).
If you select this policy and this type of sharing is detected, a warning
displays. Do one of the following:
❑ Click OK to disable access to these LUNs from other hosts.
❑ Click Cancel to disable this policy for this instance.
❑ Click More to view which LUNs are being shared with what hosts that
are conflicting with this policy.
❑ Ask these options when a LUN is enabled and sharing is detected.
If you select this policy and sharing is detected, the Shared LUN Found
dialog box displays. Do the following:
a. Select one of the following:
❑ Do not configure LUN.
❑ Configure and disable access from other hosts.
❑ Proceed with LUN configuration.
b. Click OK to accept your selection. Click Cancel to not configure the
LUN.
6.12
Updating the HBA Tree
The QLogic main window HBA tree refreshes automatically based on the polling
interval (see section 6.8). If you want to refresh the HBA tree immediately (you
changed the configuration, for example), click the Refresh button on the toolbar.