User`s guide

6 – Getting Started
Setting the Configuration Policies
FS0054601-00 E 6-15
Q
❑ Ask these options when a device is configured and sharing is
detected.
If you select this policy and sharing is detected, the Shared Device
Found dialog box displays. Do the following:
a. Select one of the following:
❑ Do not configure device.
❑ Configure and disable access from other hosts.
❑ Proceed with device configuration.
b. Click OK to accept your selection. Click Cancel to not configure the
device.
3. LUN sharing checking occurs each time a configuration change is made to a
LUN. Do one of the following to select the options for sharing LUNs among
hosts:
❑ Clear the Check for shared (enabled) LUNs among host(s) check box to
disable LUN sharing checking.
❑ Select the Check for shared (enabled) LUNs among host(s) check box
to enable device sharing checking, then select one of the following policies:
❑ Do not allow selected LUN to be enabled (no LUN sharing allowed).
If you select this policy and this type of sharing is detected, a warning
displays. Do one of the following:
❑ Click OK for your system to unconfigure or not configure the LUN.
❑ Click More to view which LUNs are being shared with what hosts that
are conflicting with this policy.
❑ Configure the selected LUN(s) and disable access from other hosts.
If you select this policy and this type of sharing is detected, a warning
displays. Do one of the following:
❑ Click OK to disable access to these LUNs from other hosts that display
in the HBA tree.
❑ Click Cancel to disable this policy for this instance.
❑ Click More to view which LUNs are being shared with what hosts that
are conflicting with this policy.