User`s guide

6 – Getting Started
Setting the Configuration Policies
6-14 FS0054601-00 E
Q
2. Device sharing checking occurs each time a configuration change is made to
a device. Do one of the following to select the options for sharing devices among
hosts:
❑ Clear the Check for shared devices (targets) among host(s) check box
to disable device sharing checking.
❑ Select the Check for shared devices (targets) among host(s) check box
to enable device sharing checking, then select one of the following policies:
❑ Do not allow selected device to be configured (no device sharing
allowed).
If you select this policy and this type of sharing is detected, a warning
displays. Do one of the following:
❑ Click OK for your system to unconfigure or not configure the device.
❑ Click More to view which devices are being shared with what hosts
that are conflicting with this policy.
❑ Configure the selected device(s) and disable access from other
hosts.
If you select this policy and this type of sharing is detected, a warning
displays. Do one of the following:
❑ Click OK to disable access to these devices from other hosts that
display in the HBA tree.
❑ Click Cancel to disable this policy for this instance.
❑ Click More to view which devices are being shared with what hosts
that are conflicting with this policy.
❑ Configure the selected device and display a message if the device
is already configured on another host(s).
If you select this policy and this type of sharing is detected, a warning
displays. Do one of the following:
❑ Click OK to disable access to these devices from other hosts.
❑ Click Cancel to disable this policy for this instance.
❑ Click More to view which devices are being shared with what hosts
that are conflicting with this policy.