User`s guide

6 – Getting Started

Setting the Alarm Log Option

6-12 FS0054601-00 E

6.10

Setting the Alarm Log Option

Perform the following steps to set the number of alarms the Alarm Log can list:

NOTE: See section 8.2 for information about viewing the Alarm Log.

1. On the SANblade Manager main window View menu, select Options. The

Options dialog box displays (see figure 6-10).

Figure 6-10. Options Dialog Box—Alarm Log Section

2. In the Alarm Log section Log Size box, type the number of alarms the Alarm

Log can list. The range is 20 to 200 alarms. The default is 200 alarms.

3. Click OK to return to the SANblade Manager main window.

6.11

Setting the Configuration Policies

You can set the policies for sharing devices and LUNs among hosts. A device or

LUN is shared when more than one host that displays in the HBA tree has access

to the device or LUN. Only hosts that display in the HBA tree are checked for shared

access to a device or LUN.

NOTE:

■ If you set a policy in which the sharing of devices or LUNs among hosts

is not permitted and SANblade Manager detects sharing, the Shared

Device Found dialog box displays (see figure 6-11).

Figure 6-11. Shared Device Found Dialog Box