User`s guide

6 – Getting Started
Setting the Configuration Change Alarm Option
FS0054601-00 E 6-9
Q
6.7
Setting the Configuration Change Alarm Option
SANblade Manager tries to keep the devices and the LUNs that the adapter displays
current. When cables are pulled, devices hot plugged into the SAN, or devices are
removed, SANblade Manager generates a configuration alarm in the Alarm Log.
Perform the following steps to set how the SANblade Manager GUI handles
configuration changes:
1. On the SANblade Manager main window View menu, select Options. The
Options dialog box displays (see figure 6-7).
Figure 6-7. Options Dialog Box—Configuration Change Alarm Section
2. In the Configuration Change Alarm section, do one of the following:
❑ Select Apply Configuration Changes Automatically to have the
SANblade Manager GUI automatically update to the new configuration.
If another host has made configuration changes that need to be updated in
this configuration, the configuration change—reloading message displays.
Click OK.
❑ Select Confirm Configuration Change Applies if you want to decide
whether to update to the new configuration.
If a configuration change occurs, the configuration change—refresh
confirmation message displays. Do one of the following:
❑ Click Yes to refresh the configuration.
❑ Click No to not update to the new configuration. The old configuration
continues to display. To update to the current configuration, manually
connect and disconnect the host (see section 7).