User`s guide
6 – Getting Started
Setting the Warning Display Option
6-8 FS0054601-00 E
Q
4. In the Application Access section, do the following to modify the SANblade
Manager application access password:
a. In the Old Password box, type the current password.
b. In the New Password box, type the new password.
c. In the Verify Password box, type the new password again to confirm the
new password.
5. Do one of the following:
❑ Click Apply to update the application access password.
❑ Click Clear Fields to clear the typed entries in the Security tabbed page
text boxes.
6.6
Setting the Warning Display Option
You can configure the SANblade Manager GUI to display warning dialog boxes
when certain conditions occur. Perform the following steps to set the warning display
option:
1. On the SANblade Manager main window View menu, select Options. The
Options dialog box displays (see figure 6-6).
Figure 6-6. Options Dialog Box—Warning Displays Section
2. In the Warning Displays section, do one of the following:
❑ Select the Enable Warning Displays check box if you want the warning
dialog boxes to display.
❑ Clear the Enable Warning Displays check box if you do not want the
warning dialog boxes to display. This is the default.
3. Click OK to return to the SANblade Manager main window.