User`s guide

6 – Getting Started
Setting SANblade Manager Security
FS0054601-00 E 6-7
Q
You can change the SANblade Manager application access password for any host
connected to your system for which you have administrator or root privileges.
NOTE: The default SANblade Manager application access password is config.
Change this password after installation to ensure that security is not
compromised.
Perform the following steps to set the application access password for a host:
1. In the SANblade Manager main window HBA tree, select the host for which you
want to set the application access password.
2. Click the Security tab. The Security tabbed page displays (see figure 6-5).
The host name displays at the top of the tabbed page.
Figure 6-5. Security Tabbed Page
3. In the Host Access section, do the following to verify that you have administrator
or root privileges for the selected host. These are the system login and password
you use to access the machine.
a. In the Login box, type the login name that has administrator or root privileges
on the host you selected.
b. In the Password box, type the login password for the login name.