User`s guide

5 – Installing SANblade Manager
Initial Installation
5-12 FS0054601-00 E
Q
9. If you are installing NetWare, the Novell NetWare Disk Selection dialog box
displays (see figure 5-9).
Figure 5-9. Novell NetWare Disk Selection Dialog Box
A list of the autodetected Windows NT/2000 drives mapped to NetWare server
system volumes (sys:\) displays.
The format for a Novell NetWare 5.x/6 server is:
drive, NetWare server name, NetWare server IP address
Perform the following steps to select the Windows NT/2000 drives on which to
install the NetWare agent. Each drive must be mapped to a NetWare server
system volume (sys:\).
a. As appropriate, select one or more autodetected drives. In figure 5-9, for
example, you could click J, 2500test, 10.3.7.71.
b. If a Windows NT/2000 drive that you want to select has not been mapped
to the NetWare server system volume, do the following:
❑ Leave the Novell NetWare Disk Selection dialog box open. From the
Exploring window, point to Tools and select Map Network Drive to map
the Windows NT/2000 drive to the NetWare Server system volume
(sys:\).
❑ From the Novell NetWare Disk Selection dialog box, type the drive letter
in the Enter Drive Letter box and then click Enter Drive Letter. In
figure 5-9, for example, you could type C in the Enter Drive Letter box
and then click Enter Drive Letter.
c. Click Next.