User`s guide

5 – Installing SANblade Manager
Initial Installation
FS0054601-00 E 5-9
Q
Do one of the following:
NOTE: For NetWare, select the drive mapped to the NetWare server (always
select a location other than the default).
❑ To select the destination location displayed in the dialog box, click Next
(recommended).
The default location for a Windows NT/2000 system is:
C:\Program Files\QLogic Corporation\SANsurfer
The default location for a Red Hat Linux and Solaris SPARC system is:
/opt/QLogic_Corporation/SANsurfer
❑ To select a different location:
a. Click Choose.
b. Select the desired location.
c. The Choose Install Folder dialog box redisplays. Click Next.
❑ If you selected a different location and want to reselect the default location:
a. Click Restore Default Folder.
b. Click Next.
6. If you are installing the SANblade Manager GUI on a Windows NT/2000 system,
the Select Shortcut Profile dialog box displays (see figure 5-6).
Figure 5-6. Select Shortcut Profile Dialog Box (Windows NT/2000)