User`s guide

12 – Troubleshooting
Tracing SANblade Manager GUI and Agent Activity (Debug)
12-14 FS0054601-00 E
Q
g. The Apply Properties to Shortcut dialog box displays. Do one of the
following:
❑ For a Windows NT system, select Modify shortcut which started this
window. Click OK.
❑ For a Windows 2000 system, select Modify shortcut that started this
window. Click OK.
4. Start the SANblade Manager application; a new console window that displays
SANblade Manager GUI activity opens.
12.2.2
Exporting or Saving Agent Activity Logs
This section discusses:
■ The agent logs (see section 12.2.2.1)
■ Exporting or saving the agent logs (see section 12.2.2.2)
12.2.2.1
The Agent Logs
Agent activity automatically logs to one of the following. The name and location of
the log differs, depending on the type of system.
■ Windows NT/2000. Event Viewer
■ Red Hat Linux. /var/log/messages
■ Solaris SPARC. /var/log/syslog
■ NetWare. sys:\\etc\qlremote.log
12.2.2.2
Exporting or Saving the Agent Logs
From a Windows NT/2000 system, do the following to save the current application
log from the Event Viewer:
1. Click the Start button, point to Programs, point to Administrative Tools, and
click Event Viewer.
2. From the Log menu, select Save As. Save the file using an appropriate name.
From a Red Hat Linux system, do the following to export agent activity:
1. Open a terminal (for example, xterm or eterm).
2. Stop the currently running qlremote agent:
# killall -TERM qlremote