User`s guide

FS0054601-00 E 11-1
Section 11
Updating the Adapter
You can update an adapter’s nonvolatile RAM (NVRAM) settings and flash BIOS.
This section discusses:
■ Updating adapter settings (see section 11.1)
■ Restoring default NVRAM settings from a file (see section 11.2)
■ Updating the flash BIOS from a file (see section 11.3)
■ Updating the FCode (see section 11.4)
NOTE: Flash BIOS applies only to Windows NT and Windows 2000 systems.
FCode applies only to Solaris SPARC systems. Refer to the appropriate
QLA2xxx adapter software installation guide for information about adapter
configuration settings (see section 1.1).
11.1
Updating Adapter Settings
This section provides detailed configuration information for advanced users who
want to customize the configuration of the QLA2xxx adapter and the connected
devices.
WARNING!!
Changing adapter settings incorrectly can cause serious damage to
your system.