User`s guide

9 – Displaying Host, Adapter, Device, and LUN Information
Displaying Adapter Information
FS0054601-00 E 9-15
Q
9.2.3
Viewing the Device List
Perform the following steps to display information about devices attached to an
adapter connected to a host:
1. In the SANblade Manager main window HBA tree, select the adapter.
2. Select the Device List tab. The Device List tabbed page displays (see
figure 9-14).
Figure 9-14. Device List Tabbed Page
The identifying information displays:
❑ Host. Name of the host connected to the adapter
❑ Adapter. Adapter number and type
❑ Node Name. World wide adapter node name
❑ Port Name. World wide adapter port name
❑ Port ID. Port ID of the adapter
The device list information displays:
❑ Path. Path number
❑ Target. Device ID of the device
❑ Loop ID. Loop ID of the device
❑ Device ID. Complement of the AL_PA
❑ Port ID. Port ID of the device
❑ Vendor ID. Vendor ID of the device