User`s guide

9 – Displaying Host, Adapter, Device, and LUN Information

Displaying Host Information

9-6 FS0054601-00 E

9.1.3.2.2

Updating Host Statistics Automatically

Perform the following steps to automatically update the host statistics at a specified

interval:

1. Select the Auto Poll check box.

2. Click Set Rate. The Statistics Sampling Rate dialog box displays (see

figure 9-4).

Figure 9-4. Statistics Sampling Rate Dialog Box

3. In the Sampling Rate box, type the sampling rate interval. The range is

1 second to 30 seconds. The default is 5 seconds.

NOTE: The faster the polling rate, the more quickly the SANblade Manager

GUI receives indications from the host. However, faster polling rates

consume more of your system’s CPU and network resources and

slow the system.

4. Click OK to set the interval. Click Cancel to not set the interval.