User`s guide

8 – Monitoring the Connections
Viewing and Managing the Alarm Log
FS0054601-00 E 8-9
Q
2. If you want to sort the alarm entries, click the column heading. A triangle displays
in the heading, indicating an ascending sort (default). Click the triangle for an
descending sort.
3. To view an individual alarm, double-click the alarm. The Alarm Details dialog
box displays (see figure 8-7).
Figure 8-7. Alarm Details Dialog Box
The Alarm Details dialog box displays the time stamp, host name, device ID,
and description.
Do the following as appropriate:
❑ Click Next to view the details of the next alarm.
❑ Click Previous to view the details of the previous alarm.
❑ Click Close to return to the Alarm Log dialog box.
4. If you want to clear the Alarm Log, see section 8.2.2.
5. If you want to export the Alarm Log, see section 8.2.3.
6. If you want to print the Alarm Log, see section 8.2.4.
7. Click OK to return to the SANblade Manager main window.
8.2.2
Clearing the Alarm Log
Perform the following steps to purge the Alarm Log of all its entries:
1. From the Alarm Log dialog box, click Clear. See section 8.2.1 for information
on accessing the Alarm Log dialog box.
2. The clear alarm entries confirmation message displays. Do one of the following:
❑ Click OK to clear the alarms. SANblade Manager clears the alarms as
follows:
❑ If you are viewing the alarms for all the hosts, SANblade Manager clears
all the alarms.