User`s guide

8 – Monitoring the Connections

Viewing and Managing the Alarm Log

FS0054601-00 E 8-7

This section discusses:

■ Viewing the Alarm Log (see section 8.2.1)

■ Clearing the Alarm Log (see section 8.2.2)

■ Printing the Alarm Log (see section 8.2.2)

NOTE: See section 6.10 for information about setting the Alarm Log options.

8.2.1

Viewing the Alarm Log

Perform the following steps from the SANblade Manager main menu to view the

Alarm Log.

1. To view the alarms for one host, do one of the following:

❑ Select the host in the HBA tree. From the View menu, select Alarm Log.

❑ Right-click the host in the HBA tree. From the pop-up menu, select Alarm

Log.

❑ Select the host in the HBA tree. Click Alarms on the toolbar.

❑ Select the host in the HBA tree. Press CTRL+SHIFT+A.

To view the alarms on one adapter, do one of the following:

❑ Select the adapter (or a device connected to the adapter) in the HBA tree.

From the View menu, select Alarm Log.

❑ Right-click the adapter (or a device connected to the adapter) in the HBA

tree. From the pop-up menu, select Alarm Log.

❑ Select the adapter (or a device connected to the adapter) in the HBA tree.

Press CTRL+SHIFT+A.