User`s guide

7 – Setting Up Connections
Viewing a Saved Host Configuration from a File
7-38 FS0054601-00 E
Q
7.9.2
Viewing the Host Configuration from a File
Perform the following steps to view the saved virtual host configuration from a file:
NOTE: You cannot view a virtual host configuration for a host that is currently
connected.
1. Do one of the following:
❑ From the Host menu, select Load from File.
❑ Right-click in the HBA tree. From the pop-up menu, select Load from File.
❑ Press CTRL+O.
2. The Open dialog box displays. Select a .qlc file from the local working directory.
Click Open.
3. The load host configuration message displays. Click OK.
The virtual host configuration displays in the HBA tree. Note that the host
configuration is blue and you can view configuration information (see
figure 7-20).
Figure 7-20. Virtual Host Configuration from a File
4. To remove a virtual host configuration from the HBA tree, disconnect it (see
section 7.1.5).