User`s guide

7 – Setting Up Connections
Replacing Devices
7-34 FS0054601-00 E
Q
4. If you clicked Next, the Select Inactive Device dialog box displays (see
figure 7-17).
Figure 7-17. Select Inactive Device Dialog Box
The Select Inactive Device dialog box displays the following information:
❑ Adapter. Adapter number, type, and world wide adapter node name.
❑ Old Device. World wide device node name of the device that you want to
replace.
❑ Table listing the inactive devices attached to the adapter. The device node
name is the world wide device node name.
Do the following:
a. From the table, select the inactive device to be replaced. The device node
name displays in the Old Device field.
b. Do one of the following:
❑ Click Back to return to the previous dialog box.
❑ Click Next to proceed.
❑ Click Cancel to exit the Device Replacement Wizard without replacing
a device.
❑ Click Help to display context-sensitive help.