Installation guide

Before You Install 1 – Introduction
1-2 FC0153302-00 D
1.2
Before You Install
Before you install the software drivers, you need to:
❑ Locate and download the appropriate drivers for your operating system.
The latest version of the QLA22xx drivers for the following operating
systems are located on the QLogic web site, http://www.qlogic.com.
❑ Santa Cruz Operations (SCO) UnixWare 7.0 and 7.1
❑ NetWare 4.X and 5.X
❑ Windows NT 4.0
❑ Windows 2000
❑ Solaris SPARC v2.6 and 7
❑ Solaris x86 v2.6 and 7
❑ Red Hat Linux 6.0 and 6.1 kernel (versions 2.2.X and above), and
6.2 kernel (versions 2.2.14-5.0 and 2.2.14-6.1)
NOTE: QLogic drivers are self-extracting and meant to be downloaded
onto diskettes. The installation instructions in this guide assume
that the QLogic drivers reside on diskettes.
❑ Read through this guide to determine which drivers you want to install.
1.3
General Description
Software drivers for the following operating systems are provided for your
QLA22xx board:
❑ Santa Cruz Operations (SCO) UnixWare versions 7.0 and 7.1
❑ Novell NetWare versions 4.X and 5.X
❑ Windows NT version 4.0
❑ Windows 2000
❑ Solaris SPARC v2.6 and 7
❑ Solaris x86 v2.6 and 7
❑ Red Hat Linux 6.0 and 6.1 kernel (versions 2.2.X and above), and 6.2 kernel
(versions 2.2.14-5.0 and 2.2.14-6.1)