Installation guide

FC0153302-00 D 1-1
Section 1
Introduction
NOTE: The following QLogic host adapter boards are collectively referred to as
the QLA22xx board unless otherwise noted:
❑ QLA2200 family (64-bit PCI to Fibre Channel copper media):
FC0210406-03 (ISP2200 chip)
FC0210406-04 (ISP2200A/33 chip)
FC0210406-05 (ISP2200A/66 chip)
❑ QLA2200F family (64-bit PCI to Fibre Channel optical media):
FC0310406-03 (ISP2200 chip)
FC0310406-04 (ISP2200A/33 chip)
FC0310406-05 (ISP2200A/66 chip)
❑ QLA2202F family (64-bit PCI to dual channel optical media):
FC0610403-04 (ISP2200A/33 chip)
FC0610403-05 (ISP2200A/66 chip)
❑ QLA2204F family (64-bit PCI to quad channel optical media):
FC2610402-XX (ISP2200A/66 chip)
❑ QLA2200G family (64-bit PCI to Fibre Channel gigabit interface
converter [GBIC]) with ISP2200A/66 chip:
FC3010402-01 (QLA2200G/66; without GBIC)
FC3010402-01(QLA2200GC/66, with GBIC copper)
FC3010402-01 (QLA2200GF/66; with GBIC optical)
❑ QLA2200L family (64-bit, low-profile PCI to Fibre Channel copper
media):
FC0210408-XX (ISP2200A/66 chip)
In the chip and board names, /33 indicates 33 MHz; /66 indicates 66 MHz.
1.1
Before You Begin
After successfully installing your QLA22xx board, you are ready to install the
software drivers you need for the QLA22xx board to communicate between your
host machine and the attached peripherals.