Installation guide

5 – Windows 2000 Driver Installation Windows 2000 Installation
FC0153302-00 D 5-3
7. Insert the diskette that contains the QLogic driver into an appropriate drive,
then type the location of the Windows 2000 driver. For example:
A:\W2K
8. Click OK.
9. Select QLogic QLA2200 PCI Fibre Channel Adapter, then click Next.
Windows 2000 indicates that the wizard is ready to install the device.
10. Click Next.
11. If the Digital Signature Not Found dialog box appears, click Yes.
12. Click Finish.
13. Remove the diskette that contains the QLogic driver from the disk drive,
then click Yes to restart the system.
5.3.3
Updating the Windows 2000 Driver
Perform the following steps if a Windows 2000 driver is already installed and you
want to install an updated version of the driver.
NOTE: The latest versions of the software drivers and documentation are
available on the QLogic web site, http://www.qlogic.com.
1. Click the Start button on the Taskbar.
2. Select Programs to Administrative Tools to Computer Management.
3. Double-click System Tools.
4. Double-click Device Manager.
5. Double-click SCSI and RAID controllers.
6. Double-click QLogic QLA2200 PCI Fibre Channel Adapter.
7. Select the Driver tab.
8. Click Update Driver. The Upgrade Device Driver Wizard dialog box
appears. Click Next.
9. Select Display a list of the known device drivers for this device so that I
can choose a specific driver. Click Next.
10. Click Have Disk. The Install From Disk dialog box opens.
11. Insert the diskette that contains the QLogic driver into an appropriate drive,
then type the location of the Windows 2000 driver. For example:
A:\W2K