Installation guide

Building a Driver from the Sources 8 – Red Hat Linux Driver Installation
8-12 FC0153302-00 F
6. Using the floppy disk you created in section 8.2.3, copy the
qla2x00src-vx.xx.tgz file to the /home/qla2x00 directory.
# cd /home
# mkdir qla2x00
# cd /home/qla2x00
# mcopy a:*.tgz . (The period [.] at the end is required.)
# tar -xvzf qla*.tgz
7. Build the driver from the sources.
For Red Hat Linux 6.0 and 7.1, type:
# make SMP=1
For Red Hat Linux 7.1, type:
# make SMP=1 OSVER=linux-2.4