Installation guide

Creating the Driver Floppy Disk 8 – Red Hat Linux Driver Installation
8-2 FC0153302-00 F
4. Download the driver to the temporary directory.
5. Insert a blank floppy disk.
6. Run the self-extracting file you downloaded. At the Unzip To Folder prompt,
specify A:\.
Verify that the floppy disk contains the following files:
■ modules.cgz
■ modules.dep
■ modinfo
■ pcitable
■ rhdd-6.1
8.2.2
Driver Floppy Disk (Installed Operating System)
Perform the following steps to create a driver floppy disk for installing a new or
upgrading an older version of the qla2x00 driver on an already installed Red Hat
Linux 6.2 operating system.
1. Download the qla2x00-x.xx-0.i386.rpm file from the QLogic Web site.
2. If What would you like to do with this file? displays, select Save this file
to disk.
3. Insert a blank floppy disk.
4. Download the file to the floppy disk.
8.2.3
Source Code Driver Floppy Disk
Perform the following steps to create a qla2x00 driver floppy disk that contains the
source code. This floppy disk must be created for Red Hat Linux 6.2, 7.0, and 7.1.
1. Download the qla2x00src-vx.xx.tgz file from the QLogic Web site.
2. If What would you like to do with this file? displays, select Save this file
to disk.
3. Insert a blank floppy disk.
4. Download the file to the floppy disk.