Installation guide

Installing UnixWare 7.0 and the
qlc2200 Driver
2-2 FC0153302-00 D
2 – UnixWare 7 Driver Installation
2.2
Installing UnixWare 7.0 and the qlc2200 Driver
Perform the following steps to install UnixWare 7.0 and the qlc2200 driver.
1. Follow the installation instructions that come with the UnixWare 7.0
installation disks. During the installation, you will be prompted to install the
driver for the QLA22xx board.
When installing UnixWare 7.0, the following choices appear (the asterisk is
the system default):
( ) Install HBA diskette
(*) Proceed with installation
2. Remove the UnixWare 7.0 installation disk and insert the disk that contains
the QLogic driver.
Select Install HBA diskette. Press F10 to continue; the qlc2200 driver
is automatically installed.
2.3
Installing UnixWare 7.1 and the qlc2200 Driver
Perform the following steps to install UnixWare 7.1 and the qlc2200 driver.
1. Follow the installation instructions that come with the UnixWare 7.1
installation disks. During the installation, you will be prompted to install the
driver for the QLA22xx board.
When installing UnixWare 7.1, the following prompt appears:
Please insert your first HBA diskette. This may be a
vendor-supplied HBA if you have one, otherwise insert
the diskette labeled:
UnixWare 7.1 Host Bus Adapter Diskette for Release 7.1
2. Remove the UnixWare 7.1 installation disk and insert the disk that contains
the QLogic driver.
Press F10 to continue; the qlc2200 driver is automatically installed.