Product specifications

5 – Using QLconfig Replacing Target Devices

FC0051102-00 A 5-25

❑ Disable the LUN on other machine(s) before enabling selected LUN.

The application first disables the LUN on the other machines before

enabling the LUN on the currently selected machine.

❑ Enabled selected LUN and display message if the LUN is also

enabled on other machine(s). QLconfig enables the LUN on the

currently selected machine and displays a message indicating that the

same LUN is also enabled on other machines.

❑ Ask these options when a LUN is enabled and sharing LUN is

detected. The application displays the above-listed options whenever a

LUN is enabled and detected as enabled on other machines. This option

is provided so you can select configuration on an individual LUN basis.

When this option is turned on and when a device’s LUNs are enabled,

the application searches all the connected machines to see if those LUNs

are also enabled on other machines. If the LUNs are enabled on other

machines, the application will take action depending on the options you

select.

3. Click Apply to save any changes you make to the options or click Cancel

to ignore those changes, if any. Both buttons close the dialog and return

you to the QLconfig main window.

5.5

Replacing Target Devices

You can replace hot-plugged target devices in your SAN system using the Device

and LUN Configuration window. Follow these steps:

1. Open the Device and LUN Configuration window by doing one of the

following:

❑ Click Machine Configuration on the QLconfig main window.

❑ Right-click on a machine in the mapping tree side of the QLconfig main

window, then select Configure Machine.