Product specifications

Configuring SAN Components 5 – Using QLconfig
5-20 FC0051102-00 A
5.3.4.1
Displaying Path Detail
Double-click on a cell with valid data in the grid to display the path with more
details.
5.3.4.2
Displaying the Menu
Right-click on a cell with a valid path to display a menu. This menu shows only
valid options. For example, a path that is currently set as primary has no Set as
primary path in its menu.
❑ Set as primary path. Use this option to set an unconfigured or failover
path to primary.
❑ Set as failover path. If you are running the QLconfig High Availability
version, this option sets an unconfigured or primary path to failover.
❑ Set as un-configured. This option sets a primary or failover path to
unconfigured.
NOTE: For the three options above, if the path belongs to a multipath device (can
be accessed by more than one QLA2xxx adapter), the other paths are
automatically adjusted to make sure that there is only one path designated
as primary.
❑ Set Path LUN Mask. Use this option to display the LUN Configuration
window, from which you can configure the machine’s devices and LUNs.
❑ Path Information. This option displays the path’s detailed information.
5.3.5
Saving Configurations
To save configurations, do one of the following:
❑ Click Save & Apply Current Configuration in the Device and LUN
Configuration window. This menu option saves the current configuration
to the registry after a validity check, and updates the QLA2xxx adapter to
make the new configuration effective immediately (without rebooting the
system).
or
❑ Click Save Current Configuration in the Device and LUN Configuration
window. The changes are sent to the machine and are saved in that machine’s
registry. The changes will not take effect until the machine is rebooted.
or