Product specifications

5 – Using QLview for Fibre Removing QLview for Fibre
FC0051101-00 A 5-41
If the password you entered does not match, a dialog displays telling
you that the wrong password has been entered.
Click OK; then type the correct password. After three incorrect
passwords, QLview for Fibre displays an error dialog, aborts the
NVRAM update, and restores the original settings.
or
❑ Press Cancel to abort the NVRAM update.
5.8.2.2
Restoring NVRAM Settings
If you change the NVRAM settings, you can restore them to their original values
by clicking Restore Previous NVRAM Settings.
If there is no difference between the original and the current NVRAM settings,
QLview for Fibre displays the message “No NVRAM parameter has been
modified!”
If you have changed at least one NVRAM setting from its original value and sent
to NVRAM by clicking Send New NVRAM Settings, QLview for Fibre prompts
you to confirm the reset.
Do one of the following:
❑ Click Yes to reset the defaults.
or
❑ Click No to keep the current settings.
5.9
Removing QLview for Fibre
To uninstall QLview for Fibre, follow these steps:
1. Select Start>>Programs>>QLogic Management Suite>>QLview for
Fibre>>unInstall.
2. Click Yes at the prompt.
3. Reboot the system.
NOTE: Be sure to stop the QLview for Fibre Agent before you uninstall the
QLview for Fibre application.