Product specifications

5 – Using QLview for Fibre Updating the System
FC0051101-00 A 5-39
4. Do one of the following:
❑ If you do not want to make any change or to send the changes already
made, click OK or Cancel.
or
❑ After making the desired changes to the NVRAM parameters, click
Send New Settings to send the new settings to the adapter.
or
❑ To restore all parameters to the settings when QLview for Fibre was
first executed, click Restore Previous NVRAM Settings.
5. If you click Send New NVRAM Settings without making any changes,
the following dialog displays (see figure 5-32):
Figure 5-32. NVRAM No New Settings Message
Click OK.
6. If you click Send New NVRAM Settings and have at least one parameter
change, QLview for Fibre displays a warning message (see figure 5-33):
Figure 5-33. NVRAM New Settings Warning Message