Product specifications

5 – Using QLview for Fibre Getting Started with QLview for Fibre
FC0051101-00 A 5-5
5.2.5.2
QLview for Fibre Security NetWare Application
You must have administrator-level authority to run and change this application’s
setup. The security application allows you to enable or disable updates to NVRAM
and the flash BIOS, and also configuration changes to the system’s target devices
and LUNs.
NOTE: QLSEC.NLM is a shared utility between QLconfig and QLview. Changes
you make using QLCSEC.NLM affect both programs.
To specify configuration changes, follow these steps:
1. Type UNLOAD QLFVAGNT at the NetWare command prompt to unload the
QLFVAGNT.NLM.
2. Type LOAD QLCSEC at the NetWare command prompt.
3. In the QLogic Agent Control window, enter the password.
4. At the Enable remote QLA2xxx adapter configuration from client? prompt,
enter Y to allow remote access or N to disable it.
If you enter N, you will not be able to set up failover or any other QLconfig
feature on your NetWare server.
5. Type LOAD QLFVAGNT at the NetWare command prompt to reload the
QLFVAGNT.NLM.