Product specifications

Getting Started with QLview for Fibre 5 – Using QLview for Fibre
5-2 FC0051101-00 A
The Set Up New Connection window displays, along with the QLview for Fibre
system tray icon in the bottom right-hand corner of your desktop (see figure 5-1):
Figure 5-1. QLview for Fibre System Tray Icon
This icon indicates that QLview for Fibre is active.
5.2.2
Opening the QLview for Fibre Main Window
When you start the QLview for Fibre application, the Set Up New Connection
window displays automatically (see section 5.2.1). If you close the window, but do
not terminate the session (see section 5.2.3), you can then reopen the main window
by following these steps:
1. Right-click the QLview for Fibre icon in the system tray.
2. Select QLview for Fibre Main Dialog from the menu.
5.2.3
Terminating the QLview for Fibre Session
To terminate the QLview for Fibre session, follow these steps:
1. Right-click the QLview for Fibre system tray icon.
2. Select Exit QLogic Fibre Channel QLview from the menu.
The application disconnects from all of the connected machines and the icon
disappears from the system tray.
NOTE: This option is not available when the DMI Management Application main
dialog is open.