Product specifications

3 – Installing QLview for Fibre Installation Instructions
FC0051101-00 A 3-17
Do one of the following:
❑ Select Yes to restart the computer now. Click Finish.
or
❑ Select No to restart the computer later. Click Finish.
18. If you are using a system configuration that includes a NetWare server, do
one of the following at the NetWare server:
❑ Reboot
or
❑ Enter the following commands at the NetWare command prompt:
RPCSTART.NCF
LOAD NWSL -r
LOAD NWDMI2
LOAD NWCDMI
LOAD ONCSP
LOAD QLFvagnt
QLview for Fibre is now ready for you to use. Refer to section 4 for descriptions
of the main windows and section 5 for instructions on setting up and using QLview
for Fibre.