Product specifications

3 – Installing QLview for Fibre Installation Instructions
FC0051101-00 A 3-3
3.4
Installation Instructions
QLview for Fibre Setup is a self-extracting program that installs the QLview for
Fibre application and related software.
NOTE: QLview for Fibre always overwrites the previous version of QLview for
Fibre.
The following steps take you through the installation process:
1. Start the setup process. Do one of the following:
❑ If you have downloaded QLview for Fibre from the Internet, locate the
QLview for Fibre folder, then double-click the QLview for Fibre Setup
icon (see figure 3-1):
Figure 3-1. QLview for Fibre Setup Icon
❑ If you are installing QLview for Fibre from a CD-ROM, start the setup
process by clicking QLview on the CD-ROM home page.
The Unpacking QLview for Fibre Setup dialog displays as the installation
process begins (see figure 3-2):
Figure 3-2. Unpacking QLview for Fibre Setup Dialog