User`s guide

72 Implementing an Open IBM SAN
Probing timeout
item adapter WWN Cur.Topo Next Topo
[0 ]pga0.0.0.7.1 1000-0000-c922-d469 FABRIC FABRIC
[1 ]pgb0.0.0.8.1 2000-0000-c922-6a63 FABRIC FABRIC
[9999 ]All of the above.
If you receive the following error:
wwidmgr available only prior to booting. Reinit system and try again.
Type P00>>>init and repeat the wwidmgr command.
If you receive the following error:
wwidmgr: No such command
If you see this message, type P00>>set mode diag and type the wwidmgr
command again.
If the system is already running, you can find the WWPN in the log file
/var/adm/messages.
2. Type #fgrep wwn /var/adm/messages
This is an example of typing var/adm/messages.
Nov 9 09:01:16 osplcpq-ds20 vmunix:KGPSA-BC :Driver Rev 1.21 :F/W Rev
2.22X1(1.13):wwn 1000-0000-c922-d469
Nov 10 10:07:12 osplcpq-ds20 vmunix:KGPSA-BC :Driver Rev 1.21 :F/W Rev
2.22X1(1.13):wwn 1000-0000-c922-d469
Nov 13 17:25:28 osplcpq-ds20 vmunix:KGPSA-BC :Driver Rev 1.21 :F/W Rev
2.22X1(1.13):wwn 1000-0000-c922-d469
Nov 14 11:08:16 osplcpq-ds20 vmunix:KGPSA-BC :Driver Rev 1.21 :F/W Rev
2.22X1(1.13):wwn 1000-0000-c922-d469
Nov 15 10:49:31 osplcpq-ds20 vmunix:KGPSA-BC :Driver Rev 1.21 :F/W Rev
2.22X1(1.13):wwn 1000-0000-c922-d469
1.12.6 Locating the WWPN for a Hewlett Packard host system
To locate the WWPN for a Hewlett Packard host system, perform the following
steps:
1. Go to the root directory.
2. Type ioscan -fn | more
3. Look under the description for the Fibre Channel Mass Storage adapter.
Note: The worldwide port names are recorded at each system startup.