User`s guide

Chapter 1. Implementing Fibre Channel host adapter cards 71
1.12.3 Locating the WWPN for an IBM eServer or IBM NUMA-Q host
To locate the WWPN for a NUMA-Q host system with an IOC-0210-54 adapter,
perform the following steps from the IBM Enterprise Storage Specialist:
1. From the Enterprise Storage Specialist Welcome panel, click Storage
Allocation.
2. From the Storage Allocation graphical view panel, click Open System
Storage.
3. From the Open System Storage panel, click Modify Host Systems.
4. In the Host Nickname field, type the nickname.
5. In the Host Name field, click either IBM NUMA Server (WinNt) or IBM NUMA
Server (UNIX) from the list.
6. Click the Down Arrow to the right of the Host Attachment field.
7. From the list, highlight and click Fibre Channel Attached.
8. In the Hostname/IP Address field, type the hostname.
9. Click the Down Arrow to the right of the World-Wide Port Name field.
10.Select the worldwide port name from the list.
11.Click Perform Configuration Update.
1.12.4 Locating the WWPN for an RS/6000 and pSeries host system
To locate the WWPN for an RS/6000 or pSeries host system, perform the
following steps:
1. Login as root.
2. Type lscfg -vl fcsx, where x is the adapter number.
The network address is the Fibre Channel adapter port WWPN value.
1.12.5 Locating the WWPN for a Compaq host system
To locate the WWPN for a Compaq host system, perform the following steps:
1. From the console prompt, type P0>>>wwidmgr -show ada.
Following is an example of what is displayed:
Note: The lscfg -vl fcsx ROS level identifies the Fibre Channel adapter
firmware level.