User`s guide

Chapter 1. Implementing Fibre Channel host adapter cards 63
11.Click Save.
12.When the download completes, click Open Folder.
13.From the A:\ window, double-click the icon for the driver file you downloaded
to the floppy diskette.
14.In the window for WinZip Self-Extractor, type a:\
15.Click Unzip.
When the unzip process completes, you should see a message that says, x
files unzipped successfully, where x equals the number of files you unzipped.
16.Click OK.
17.Click Close to close the window for WinZip Self-Extractor.
1.11.5 Installing the Fibre Channel adapter drivers
Perform the following steps to install the Fibre Channel adapter drivers.
1. From your Windows 2000 desktop, double-click the icon for My Computer.
2. Double-click the icon for Control Panel.
3. Double-click the icon for SCSI Adapters.
4. In the SCSI Adapters window, click the Drivers tab.
5. Click Add.
6. In the Install Drivers window, click Have Disk.
7. In the Install from Disk window, ensure that the drive letter in the field for Copy
Manufacturer’s Files From is the drive letter you specified to save the .exe file
to when you downloaded the driver previously.
8. Type the name of the current driver file in the field for Copy Manufacturer’s
Files From after the drive letter prompt.
9. Click OK.
10.Click Cancel to exit.
11.Restart your host system.
1.11.6 QLogic QLA2100F or QLogic QLA2200F configuration
To configure the host adapter card, use the IBM TotalStorage ESS Specialist.
Note: If you are installing the Fibre Channel adapter for the first time, you must
specify the correct topology. You must also select the appropriate device
mapping driver.