User`s guide

60 Implementing an Open IBM SAN
Perform the following steps to install the QLogic QLA2100F adapter card:
1. Install the QLogic QLA2100F adapter card in the host system.
2. Connect the cable to the ESS port.
3. Restart the host system.
4. Press Alt+Q to get to the FAST!Util menu.
5. From the Configuration Settings menu, select Host Adapter Settings.
6. From the Advanced Adapter Settings menu, press the Down Arrow to
highlight LUNs per target and then press Enter.
7. Use the Down Arrow to find and highlight 256. Press Enter.
8. Press Esc.
9. To save the changes, click Yes. Press Enter.
10.Restart the server.
1.11.3 Installing the QLogic QLA2200F adapter card
This section tells you how to attach an ESS to a Windows 2000 host system with
the QLogic QLA2200F adapter card. Single-and dual-port Fibre Channel
interfaces with the QLogic QLA2200F adapter card support the following public
and private loop modes:
򐂰 Tar ge t
򐂰 Public initiator
򐂰 Private initiator
򐂰 Target and public initiator
򐂰 Target and private initiator
Perform the following steps to install the QLogic QLA2200F adapter card:
1. Install the QLogic QLA2200F adapter card in the host system.
2. Connect the cable to the ESS port.
3. Restart the server.
Note:
1. The arbitrated loop topology is the only topology available for the QLogic
QLA2100F adapter card.
2. When you install the QLA2100F adapter card on your host system,
IBM recommends that you install the card on a host system with four
processors. This ensures that you do not have a problem when you start
the host system.