User`s guide

Chapter 1. Implementing Fibre Channel host adapter cards 55
9. From the File Download window, click the appropriate radio button and
proceed as indicated:
– To open this file from its current location, go to step 9.
– To save this file to disk, go to step 16.
10.In the window for Winzip, click I agree.
11.In the window for WinZip Wizard - Welcome, click Next.
12.In the window for WinZip Wizard - Select Zip File xxxxxxxx.zip, where
xxxxxxxx is the name of the file, highlight the file that you want to unzip.
13.Click Next.
14.In the window for WinZip Wizard - Unzip, click Unzip now.
A progress indicator window appears when the operation to unzip the file
completes. A window opens to display the following file names:
– Lpscsi
– Lputilnt
– Oemsetup
– Readme
– Txtsetup.oem
15.Double-click Readme to get the instructions to install the Fibre Channel
adapter driver. Print the Readme file.
16.In the window for WinZip Wizard -Unzip Complete, click Close.
17.Ensure that the name of the file you want to download is displayed in the
window.
18.Click Save to download and unzip the file to your hard drive.
A window opens that indicates the progress of the download operation. When the
progress indicator window closes, the download is complete.
1.10.11 Installing the Fibre Channel adapter drivers
Perform the following steps to install the Fibre Channel adapter drivers.
1. From your desktop, click Start Settings.
2. Double-click Control Panel.
3. Double-click SCSI Adapters.
4. Click the Drivers tab.
Note: If you are installing the Fibre Channel adapter for the first time, you must
specify the correct topology. You must also select the appropriate device
mapping driver.