User`s guide

Chapter 1. Implementing Fibre Channel host adapter cards 51
12.Press Esc.
13.Save the changes. Highlight Yes.
14.Restart the server.
1.10.4 Downloading the current Fibre Channel adapter driver
Perform the following steps to load the current driver onto the QLogic adapter
card:
1. Go to the following Web site:
www.qlogic.com
2. From the home page, click Driver Download.
3. Click Use QLogic Drivers.
4. Click IBM Enterprise Subsystems Division approved drivers.
5. Click IBM Approved QLA22xx drivers or IBM Approved QLA21xx drivers.
6. Click Link to Driver for Windows NT.
7. In the window for File Download, click Save this Program to Disk.
8. Insert a floppy diskette into your floppy disk drive.
9. In the field for Save in, change the drive letter to A:\
10.Create a folder called Temp in the Save As window.
11.Click Save.
12.When the download completes, click Open Folder.
13.From the A:\ window, double-click the icon for the driver file you downloaded
to the floppy diskette.
14.In the window for WinZip Self-Extractor, type a:\
15.Click Unzip.
When the unzip process completes, you should see a message that says, x
files unzipped successfully, where x equals the number of files you unzipped.
Note: If you connect the ESS directly to the host system, the option you select
must match the port connections on the ESS. However, if you connect through
a switch, the options do not need to match the port connections because the
ESS is point-to-point. The appropriate HBA on the server must also support
point-to-point connection on a direct connection. Currently, disparate vendors
do not function properly in a direct point-to-point connection. This statement is
not true if you connect through a switch because the ESS is point-to-point.