User`s guide

Chapter 1. Implementing Fibre Channel host adapter cards 43
In Table 1-9 we show the recommended configuration file parameters for the host
bus adapters for the QLogic QLA2200F adapter.
Table 1-9 Recommended QLA2200F HBA settings
scan-down 2: Recommended. Use inverted ALPA map and cause
target assignment in private loop.
topology 2: Recommended for fabric. Point-to-point mode only.
4: Recommended for non-fabric. Arbitrated loop mode only.
zone-rscn 0: Default
1: Recommended for fabric; check name server for RSCNs.
Parameters Recommended settings
hba0-max-frame-length 2048
hba0-max-iocb-allocation 256
hba0-execution-throttle 31
hba0-login-timeout 4
hba0-login-retry-count 1
hba0-fabric-retry-count 10
hba0-enable-adapter-hard-loop 0
hba0-adapter-hard-loop-I 0
hba0-enable-64bit-addressing 0
hba0-enable-LIP-reset 0
hba0-enable-LIP-full-login 1
hba0-enable-target-reset 0: Non-clustered
1: Clustered
hba0-reset-delay 5
hba0-port-down-retry-count 30
hba0-link-down-error 1
hba0-loop-down-timeout 60
hba0-connection-options 1: Fabric connection
2: Direct connection
hba0-device-configuration-mode 1
hba0-fc-tape 0
hba0-command-completion-option 1
Parameters Recommended settings