User`s guide

Chapter 1. Implementing Fibre Channel host adapter cards 37
1.9.9 Downloading current JNI SBUS Fibre Channel adapter driver
This section tells you how to download the JNI SBUS Fibre Channel adapter
driver:
1. Plug in and restart your host system.
2. Go to the following Web site:
www.jni.com
3. From the navigation menu at the top of the page, click Drivers.
4. From the menu for Locate Driver by Product, click FC64-1063.
5. From the menu for FCI-1063, find the section for Solaris -JNI. Click fcw.pkg.
6. In the dialog box for File Download, click Save this file to disk. Click OK.
7. In the Save As dialog box, create a temporary folder.
8. Click Save.
9. When you click Save, a window displays that shows the progress of the
download.
10.When the download completes, click Close.
11.If you downloaded the driver file from a Sun host system, go to Installing the
JNI SBUS Fibre Channel adapter driver. If you downloaded the driver file
from a non-Sun host system, transfer the drive file to a Sun host system.
1.9.10 Installing the JNI SBUS Fibre Channel adapter driver
Perform the following steps to install the JNI SBUS Fibre Channel adapter
drivers.
1. Go to the following Web site:
www.jni.com
2. From the navigation menu at the top of the page, click Drivers.
3. From the menu for Locate Driver by Product, click FC64-1063.
4. From the menu for FC64-1063, find the section for Solaris -JNI. Click
readme.txt.
5. Print the readme.txt file.
6. Follow the instructions in the readme.txt file to install the JNI SBUS adapter
card.
7. Update the parameter list. See Table 1-7 on page 42.
8. Restart the host system.