User`s guide

30 Implementing an Open IBM SAN
5. Click “Select an additional driver.”
6. Press the Insert key.
7. Insert a floppy diskette with the QLogic drivers into the A:\ drive of the
NetWare server. Press Enter.
The available driver is displayed.
8. Select the driver for the QLogic card and press Enter.
9. Select Modify driver parameters and enter the slot number of the QLogic
card into the slot number parameter.
10.Set the Scan All Luns parameter to Yes.
11.Press Tab and select Save Parameters and Load Driver.
12.Exit the nwconfig or install utility.
13.If storage has already been assigned to the server from the ESS Specialist,
type SCAN FOR NEW DEVICES, SCAN ALL LUNS, and LIST DEVICES.
The ESS hosted volumes are displayed in the devices list. Create volumes using
the nwconfig utility if necessary.
1.8.5 ESS QLogic QLA2100F/2200F host adapter card
To configure the host adapter card, use the IBM TotalStorage ESS Specialist.
1.9 Sun FC host system attachment
This topic tells you how to change the Sun system kernel. Before you start, you
must meet several attachment requirements.
1.9.1 Attachment requirements
This section lists the requirements for attaching the ESS to your host system:
򐂰 Ensure that you have all the equipment you need.
򐂰 Ensure that there are enough Fibre Channel adapters installed in the server
to handle the total LUNS you want to attach. The maximum LUNs per adapter
in a Fibre Channel arbitrated loop topology is 50.
򐂰 Ensure that you have the documentation for your host system, and that the
IBM Enterprise Storage Server User’s Guide is on the compact disc that you
receive with the ESS.