User`s guide

Chapter 5. Implementing the Vicom Fibre Channel SLIC Router 355
5.8.2 Creating the mirror
The mirror can now be created by selecting Tools -> Mirror Drive Setup
Wizard. When the Member Selection window appears, select the composite
drives as members of a mirror. Figure 5-33 shows where composite drives
‘ITSO1’ and ‘ITSO3’ are selected as members of a mirror.
Figure 5-33 Creating mirror drive from two composite drives
Continue through the Mirror Drive Setup Wizard to complete the process as
described in 5.6, “Mirror drive” on page 342.