User`s guide

Chapter 5. Implementing the Vicom Fibre Channel SLIC Router 349
Figure 5-26 Instant Copy Drive Properties
The properties that can be changed are the FC LUN and the Drive Name. There
will be a suggested LUN number in this field that can be accepted. If not, simply
type in the desired LUN number. A name can also be defined to the copy drive
for easier identification, with a limit of up to eight characters.
Click the Next> button and a dialog box appears to allow you to create another
copy drive. Click Yes if you would like to create another copy drive and the
Instant Copy Drive List window opens, and the steps described above can be
repeated.
Click Finish when you have created all the desired copy drives. Up to this point,
the configuration has been kept within the SLIC Manager software. When the
Finish button is clicked, the SLIC Manager will now communicate to the Router
to complete the process and update the Router to control the drives.
5.7.2 Instant copy drive properties
You can go to the Control Center window by selecting Tools -> Control Center.
The copy drive that was created above can now be seen in the Mirror
Drive/Instant Copy window, as shown in Figure 5-27.