User`s guide

338 Implementing an Open IBM SAN
From the Available Drive Pool list, click a desired drive and then click the Add>>
button. The drive name will be added to the Member window. An asterisk will
appear on the left hand side of the drive that was selected in the Available Drive
window, to denote that the drive has been selected. Each drive is added one at a
time. To remove a drive from the Member window, select the desired drive and
click the Remove<< button.
Below each window there is a Drive Capacity box. As a drive is selected, its
capacity in megabytes is shown. As you add more member drives to the Member
window, the Drive Capacity box will add all drive sizes together to provide a total
capacity in megabytes. This is shown in Figure 5-15.
Figure 5-15 Creating composite drive from available drives