User`s guide

334 Implementing an Open IBM SAN
5.4.1 Drive properties
You can get detailed information on each drive. Select the drive so that it is
highlighted and then select Properties. A dialog box will appear with the drives
information, as shown in Figure 5-10.
Figure 5-10 Disk drive properties
Here you can see its SSA attributes, its Fibre Channel attributes and its model
type and serial number. By clicking the Identify button, the LED on the selected
drive will begin to flash.
5.4.2 Router properties
To view the information on the Router, go to the toolbar and select Properties ->
SLIC Properties. As shown in Figure 5-11, you will see the serial number of the
Router, its ID that was set in SW1, and its supported features.