User`s guide

Chapter 4. Implementing the SAN Data Gateway 313
Once changed, as shown in Figure 4-46, the information shown on the main
window will reflect the change, and the icon on the left-hand side of the WWN
changes to depict a switch.
Figure 4-46 Switch port information
Attaching hosts to the switch
Any hosts that will attach to the switch should have the host registration software
loaded and installed. Refer to , “Host registration” on page 298 for details. Plug in
the Fibre Channel cable from their respective adapters and power on, or restart
the host. The registration of the hosts will be completed through the switch.
Figure 4-47 shows a switch installed on port 4 and two hosts connected on the
switch. The host plymouth is now connected through the switch and an NT host
was added.
Figure 4-47 Hosts and a switch on a Gateway port