User`s guide

288 Implementing an Open IBM SAN
A detailed description of the SCSI and Fibre Channel settings can be found in the
IBM Storage Area Network Data Gateway Installation and User’s Guide,
SC26-7304.
4.3.3 Upgrading the firmware
New versions of the SAN Data Gateway firmware can be downloaded from
http://www.storage.ibm.com/hardsoft/products/sangateway/gatewayspec.htm
This site has a link to a Downloads section from where the latest versions of the
SAN Data Gateway can be downloaded. You will first have to complete a
registration form and then agree to the IBM Terms and Conditions.
Once you have completed this section, you will find a screen similar to that
shown below in Figure 4-17.
Figure 4-17 Downloading the SAN Data Gateway firmware