User`s guide

286 Implementing an Open IBM SAN
Figure 4-13 Fibre Channel host data
As you select and highlight the different ports or devices, there are different
options available from the top toolbar. If an SCSI channel is highlighted, select
Controls from the toolbar. You will notice that all options are grayed out except
for SCSI Channel. Once selected, a dialog box will appear, as shown in
Figure 4-14, and display the settings for the SCSI channel.
Figure 4-14 SCSI channel parameters
Selecting the Advanced Options button displays a dialog box, as shown in
Figure 4-15. These settings are not typically changed and may disrupt normal
operations, so you should consult a service representative before changing any
Advanced Options.