User`s guide

Chapter 4. Implementing the SAN Data Gateway 281
As we can connect to several SAN Data Gateway systems from one client
session, select the particular Gateway you want and it will be highlighted in blue,
as shown in Figure 4-7.
Figure 4-7 Selecting from multiple SAN Data Gateways
On the left-hand side of the highlighted Gateway, there is a small key, and by
selecting this, it expands the view to show you all SCSI ports and installed Fibre
Channel ports. For example, Figure 4-8 shows a Gateway with four SCSI ports
and two Fibre Channel ports.
Figure 4-8 Expanded Gateway view